Difference between revisions of "Options Menu"

From PiBoSo Documentation
Jump to navigation Jump to search
(Created page with "==Input== ===Calibration=== ===Controls=== ===Direct Lean=== ===Force Feedback=== ===Advanced=== ==Input 2== ===Gearbox=== ===Controls=== ===View=== ===Gestures=== ==Input 3...")
 
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
==Input==
==Input==
===Calibration===
===Calibration===
Move all the axis on your controller to their extents, then click ok to save calibration.
===Controls===
===Controls===
:'''Lean''' : Bike L/R control
:'''Throttle'''
:'''Brake''' : Front Brake Lever control
:'''Rear Brake'''
:'''Clutch'''
:'''F/B Lean''' : Rider forwards (tuck) and backwards (sit up) lean
:'''L/R Lean''' : Rider left / right lean control, only used if auto lean is disabled
===Direct Lean===
===Direct Lean===
:'''Enable''' :
===Force Feedback===
===Force Feedback===
:'''Enable''' : For FF enabled joysticks and wheels. Gamepad rumble is not supported.
:'''Strength''' : Values above 100% may negatively impact subtle effects
:'''Reverse''' : Reverses the force effects, required by some controllers
===Advanced===
===Advanced===
Allows you to fine tune the controller inputs for each axis. Click on the down arrow next to '''''Lean''''' to select other axis.
:'''Deadzone''' : Useful to remove unwanted wobble in the center of steering motion, for example
:'''Linearity''' : Can provide more accuracy at the start of axis motion
:'''Press''' : When a button or key is assigned, adjusts axis increase speed when pressing
:'''Release''' : When a button or key is assigned, adjusts axis decrease speed when releasing


==Input 2==
==Input 2==
===Gearbox===
===Gearbox===
:'''Preload'''
:'''Shift Up'''
:'''Shift Down'''
===Controls===
===Controls===
:'''Reset''' : To reset the bike on the track after a crash. Press once to reset in-place, press and hold to reset to the track.
:'''Low Speed''' : Push the bike backwards and forwards
:'''Dash''' : Change the information displayed on the dashboard
:'''Pit Limiter''' : Pitlane speed limiter toggle
:'''Engine Mapping''' : Switch between '''''Qualify, Race, Wet''''' engine mappings while on track
===View===
===View===
:'''Change View''' : Switch between Onboard, Cockpit, External views
:'''Look Back''' : Look behind
:'''Heading''' : Look to the left and right
:'''Tearoff''' : Clean visor
===Gestures===
===Gestures===
 
:'''Raise Arm''' : To let online riders know you are pitting, for example
:'''Complaint''' : Unimpressed with someone's riding?
:'''Win Gesture''' : You're number 1!
:'''Angry Gesture''' : You only have yourself to blame.
:'''Chat''' : Talk to other riders while ontrack
==Input 3==
==Input 3==
===Replay Camera===
===Replay Camera===
This allows you to control the free roam replay camera with your analogue controller
==Graphics==


==Graphics==
===Screen===
===Screen===
===Textures===
===Textures===

Latest revision as of 16:41, 13 January 2020

Input

Calibration

Move all the axis on your controller to their extents, then click ok to save calibration.

Controls

Lean : Bike L/R control
Throttle
Brake : Front Brake Lever control
Rear Brake
Clutch
F/B Lean : Rider forwards (tuck) and backwards (sit up) lean
L/R Lean : Rider left / right lean control, only used if auto lean is disabled

Direct Lean

Enable :

Force Feedback

Enable : For FF enabled joysticks and wheels. Gamepad rumble is not supported.
Strength : Values above 100% may negatively impact subtle effects
Reverse : Reverses the force effects, required by some controllers

Advanced

Allows you to fine tune the controller inputs for each axis. Click on the down arrow next to Lean to select other axis.

Deadzone : Useful to remove unwanted wobble in the center of steering motion, for example
Linearity : Can provide more accuracy at the start of axis motion
Press : When a button or key is assigned, adjusts axis increase speed when pressing
Release : When a button or key is assigned, adjusts axis decrease speed when releasing

Input 2

Gearbox

Preload
Shift Up
Shift Down

Controls

Reset : To reset the bike on the track after a crash. Press once to reset in-place, press and hold to reset to the track.
Low Speed : Push the bike backwards and forwards
Dash : Change the information displayed on the dashboard
Pit Limiter : Pitlane speed limiter toggle
Engine Mapping : Switch between Qualify, Race, Wet engine mappings while on track

View

Change View : Switch between Onboard, Cockpit, External views
Look Back : Look behind
Heading : Look to the left and right
Tearoff : Clean visor

Gestures

Raise Arm : To let online riders know you are pitting, for example
Complaint : Unimpressed with someone's riding?
Win Gesture : You're number 1!
Angry Gesture : You only have yourself to blame.
Chat : Talk to other riders while ontrack

Input 3

Replay Camera

This allows you to control the free roam replay camera with your analogue controller

Graphics

Screen

Textures

Lighting

Detail Level

Misc

Audio

Units

Date Format

User Interface

Connection

Autochat

Track

Simulation

Cockpit View

Riding Aids